Robust Straight Chip Van
High Volume Belly Chip Van
Standard features
1
Year
Warranty
Bolted roof cross bows Benefit: Facilitates maintenance
Top rear corners integrated into header Benefit: Increased durability and reliability
Subframe with plug welded connections Benefit: Superior connection for increased strength and lower maintenance costs
Other benefits
- Reinforced galvanized rear sill with integrated push blocks
- 5 1/2" high open top aluminum extrusion top rail
- Tarp supports factory installed for future roll tarp installation
- Raised aluminum plate for electrical connectors on front wall for easy access
Optional features
Interior Liners
Option for aluminum skin including front wall or Kemlite LTR composite material
Rear End
Various door configurations, single, double, with wire mesh, with blower door
Cat Walk
Aluminum 18" or 24" wide on front wall with ladder
Specifications
Dimensions
Length
48'-53'
Width
102"
Coupler Height
47"-50"
King Pin
14" or 18"
Drop Height
35 1/2"
Sub Structure
Coupler Plate
5/16" thick, reinforced, 100 000 psi steel
Front Wall
Front Wall
6 Post Design, Pre-painted aluminum with double sheeting aluminum corners, unpolished on the outside and aluminum plate inside
Interior Liner
1/2" plywood with silicone sealed joints
Ladder
One ladder made of aluminum, road side front wall
Side wall
Side Panels
.049" Prepainted White Aluminum Panels
Posts
Aluminum 45mm deep on 16" c/c full length
Vents
4 openings 11" x 19" on each side wall with perforated aluminum plate
Rear End
Door Frame
Galvanized (G164)
Rear Header
Steel formed 4"x4" x 3/16"
Doors
Single dump style, aluminum with door latch on door sill manually operated with a road side handle
Bumper
Galvanized CMVSS & DOT approved with 4" x 4" roll formed tube cross bar with solid steel push bars
Roof
Roof
Open type
Roof Bows
3 galvanized steel, without offset and hinges
Tarp Support
1/4" aluminum plate each of the unit for roll type tarp
Electrical
Main System
Grote Ultra Blue LED sealed lights & wiring harness system meets Transport Canada and DOT requirements
Back-up Lights
2 sealed beam spot lights in rubber grommet in rear sill
Landing Gear
Landing Gear
Holland 2 Speed
Structure
Galvanized and reinforced
Dummy Legs
Skids made of aluminum extrusion 4" x 1 1/4"
Suspension
Bogie
Fixed 1/4" thick, 80 000psi steel, C-shaped with plug welded connections
Suspension
Hendrickson HT or Intraax air ride
ABS System
Wabco ABS 2S-1M
Air System
Gladhands
Fixed at front
Accessories & Finishing
Decals
Conspicuity tape complies with DOT and CMVSS standards
Photo
gallery
Contact your
Sales representative
Our team is ready to assist you with any concern or question you may have.
Find your Rep
Configure &
request a quote
Manac offers a wide variety of customizations so that you can get a semi-trailer that fits your needs.
Request a quote
