Efficient 35 Ton Extendable Mechanical Lowbed
Efficient 35 Ton Mechanical Lowbed
Standard features
Other benefits
- Capacity of 70,000 lbs on 12'-0"
- 4 beam design
- Integrated toolbox storage for air and electrical lines
- Integrated foot step with grab handle to access top deck
Optional features
Lighting
Various options for exterior light packages
Outriggers
Galvanized removeable outriggers 15 per side or Retractable aluminum extruded outriggers for over width loads like farm machinery
Flip-Up Axle
Removable flip up axle
Specifications
Dimensions
Length
48'-0" (main deck 29' and 29'-3" on sides)
Width
102" side rail to side rail
Deck Height
Main deck, 8" under center beams, 21" above ground
Coupler Height
48"-50"
King Pin
16"
Body Structure
Coupler Plate
5/16" including nose ramp with rollers
Gooseneck
Mechanical detachable, beams 12" high, with 100,000 psi flanges, 84" clear behind king pin with manual gooseneck locks at 2 locations
Web
1/4" 80,000 psi steel 12" high for main beams and 15" high for rear beams
Flanges
Main beams 3/4" x 8", 100,000 psi steel and rear beams 1/2" x 6" top and 3/4" x 6" bottom flanges
Crossmembers
80,000 psi, front I-beams 4" @ 3.64 lbs/ft, 80 000 psi on 14" c/c, main deck "C" shaped steel 1/4" thick 2 1/2" x 8" high on 24" c/c with I-beams 4" @ 3.64 lbs/ft between each crossmember
Floor
Apitong or equivalent, 1 1/8" thick, shiplap finished, no preservative, front and rear full width and open at center between main beams of main deck. Checker plate 3/16" above rear wheels and slope
Side Rail
Fabricated H-beams 12" high 3/8" x 5", 100,000 psi steel with 3/16" web 80,000 psi with parachute holes
Outriggers
Attachment bushing only, qty: 30, 15 each side
Front End
6" x 4" x 1/4" tubing
Bumper
8" x 4" x 3/16" tubing, wide load sign support and warning strobe light support near 4-way rear connector and pin up joints for flip-up axle (bushings included)
Electrical
Main System
Grote Ultra Blue LED sealed lights & wiring harness system meets Transport Canada and DOT requirements
Suspension
Suspension
Fixed, Hendrickson (1) HT-250YS-9 and (1) HT-250US , tandem 54" spread
ABS System
Wabco ABS 2S-1M
Air System
Gladhands
In basket at front deck including hoses and on rear bumper for flip-up axle option
Accessories & Finishing
Paint
Shot blasted, one coat of epoxy primer and two acrylic polyurethane top coats
Decals
Conspicuity tape complies with DOT and CMVSS standards
Lashing Rings
18 heavy-duty D-rings, 5 bent style each side of main deck and 2 at each side of front and rear
Storage Box
1 between two beams of the gooseneck
Flags
4 flags including 4 supports, 2 on rear rail gooseneck and 2 on rear bumper
Photo
gallery
Configure &
request a quote
Manac offers a wide variety of customizations so that you can get a semi-trailer that fits your needs.
Request a quote
